Categories

 

 

 

 

Motor Stepper 5V DC 4 Phase & ULN2003 Driver Board A23+A24

Motor Stepper 5V DC 4 Phase & ULN2003 Driver Board A23+A24
Product Code: Motor Stepper & Driver Board BIN 43
Availability: ETA 30 Days ETA (please call)
Price: R80.00
Ex Vat: R69.57
Qty:     - OR -   Add to Wish List
Add to Compare

Stepper Motor 5V DC 4 Phase & ULN2003 Driver Board A23+A24


 

1 x 5 Volt Unipolar Stepper motor

1 x ULN2003 Stepper Motor Driver Board

Stepper motor with step angle of 5.625° mainly used in Air Conditioner LouverS, Small Cooling/Heating Fan etc.

 

Bullet Points:

1 piece x 5V Unipolar Stepper motor with ULN2003 Board

Voltage: DC 5V 

Step Angle: 5.625 x 1/64

Stride Angle : 5.625° /64

Reduction Ratio: 1/64

Number of Phases : 4

 

Specifications for Stepper Motor:

Voltage: DC 5V

Diameter: 25mm

Step Angle: 5.625 x 1/64

Reduction Ratio: 1/64

Rated voltage : 5VDC

Number of Phases : 4

Speed Variation Ratio : 1/64

Stride Angle : 5.625° /64

Frequency : 100Hz

DC resistance : 50O±7%(25?)

Idle In-traction Frequency : > 600Hz

Idle Out-traction Frequency : > 1000Hz

In-traction Torque  >34.3mN.m(120Hz)

Self-positioning Torque >34.3mN.m

Friction torque : 600-1200 gf.cm

Pull in torque : 300 gf.cm

Insulated resistance >10MO(500V)

Insulated electricity power :600VAC/1mA/1s

Insulation grade :A

Rise in Temperature  <40K(120Hz

Noise  <35dB(120Hz,No load,10cm)

Model : 28BYJ-48

 

Features of ULN2003 BASED Stepper motor driver board:

ULN2003 Stepper Motor Driver Board is compact

It uses the ULN2003 driver chip to amplify the control signal from the Arduino and other MCU used.

It uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor ( 5v to 12v ).

Compatible with  Arduino or other development platform to drive the stepper motor.

 

More Features:

4-way signal indicator

All the pins have Input leads Mounted for easy connection to use

XH-5P socket can be connected directly 28BYJ-48 Model stepper motor

A. B. C. D LED indicating the four phase stepper motor working condition.

White jack is the four phase stepper motor standard jack.

Power pins are separated

 

Other Specifications:

Dimensions: 32 x 18 x 11mm (LxWxH)

 

 

How to Control Stepper:-

 

The stepper motor is used to convert pulse to angular displacement. So if you give the stepper driver a certain pulse signal, it will drive the stepper motor to a certain angle. you can control the angle of the stepper motor by adjusting the number of pulses. And you also can control the speed of the stepper rotation by the frequency of the pulse.

 

Connections:

IN1-4 to the Microcontroller Pins

The pins in the white jack (from left to the right) are: VCC, A, B, C, D (to the stepper motor)

Power pins are on the right, use jumper to choose either 5V or 12V.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: